function modbusWriteSingleCoil()

From wiki.netio-products.com
Jump to navigation Jump to search

Write value to single coil using modbus protocol. The call is asynchronous: the code execution proceeds immediately and when the response arrives, callback function is called.

nil modbusWriteSingleCoil(table config)

Parameters

table config{deviceAddress, callback, address, value, port, timeout}
  • string deviceAddress IP address of device
  • function{response} callback this function is called when response arrives
  • string address number of the coil
  • boolean value the value to be written
  • optional number port numer of port (default 502)
  • optional number timeout maximum seconds to wait for response (default 30)


Callback Parameters

table response{result, errInfo, address}
  • number result error code of the response (0 is success)
  • string errInfo error description (if result>0)
  • number address number of the input register

Return value

nil

Usage

-- Turn on all outputs on NETIO with IP 10.0.0.105 and port 505
local function modbusWriteCallback(data)
  log(string.format("addr %d, result %d", data.address, data.result))
end

for i = 101,104 do
  modbusWriteSingleCoil{deviceAddress='10.0.0.105', port=505, timeout=6, address=true, value=4, callback=modbusWriteCallback}
end


Requirements

Netio FirmWare 3.3.0+