Revision as of 18:35, 27 October 2020

The MQTT-flex version of the MQTT protocol can be configured in detail thanks to the “flex” extension.

https://www.netio-products.com/en/glossary/mqtt-flex

Why MQTT-flex
There is a lot of approaches in integration of MQTT in devices and systems. One vendor prefer one topic with structured data payload, the another one prefer tree topic structure with simple value in data payload. MQTT-flex is a standard MQTT with specific configuration approach. The goal of MQTT-flex is to give a user opportunity to integrate NETIO device with any system with different data approach.

Configuration of MQTT in devices supporting MQTT flex is done by JSON (JavaScript Object Notation). With MQTT-flex you can easily define the MQTT topics, payloads and device behaviour via text configuration in JSON object format. Since there is then lot of possibilities with such freestyle flexibility allowed, you can find bellow full set of all implemented attributes.

1 Supported devices:
2 Simple MQTT-flex configuration + explanation
3 Config sections
4 Target / Source
- 4.1 INPUT / OUTPUT (Target) selection
- 4.2 Examples:
5 Commands
6 Variables
- 6.1 Target Source Variables
  - 6.1.1 OUTPUTS variables
  - 6.1.2 INPUT variables
    - 6.1.2.1 STATE
    - 6.1.2.2 S0
- 6.2 Payload/topic variables
7 Extended MQTT flex JSON config examples
- 7.1 Default NETIO MQTT-flex configuration

Supported devices:

PowerCable MQTT 101x
PowerCable OEM (DevKit)
PowerPDU 4PS
PowerDIN 4PZ
PowerBOX 3Px

FW version:
>2.2.1

Simple MQTT-flex configuration + explanation

We strongly recommend to create and test MQTT-flex configuration on "local" device what can be easily restarted. The validation of config before saving is not 100% and for example some specific typos can cause a freeze of a device - the solution is to restart a device (unplug/plug input power cable). If the configuration is saved and device is working then there are no known failure case so it is safe to use this configuration on the "remote" devices.

{
     "config":{
        "broker":{
            "url":"broker.hivemq.com",
            "protocol":"mqtt",
            "port":1883,
            "ssl":false,
            "type":"generic",
            "username":"freedom",
            "password":"peace|LOVE|empathy4ALL"
        },
        "subscribe":[{
               "topic":"netio/${DEVICE_NAME}/output/1/action",
               "qos":0,
               "target":"OUTPUTS/1/ACTION",
               "action":"${payload}"
           }
       ],
       "publish":[{
               "topic":"netio/${DEVICE_NAME}/output/1/state",
               "qos":0,
               "retain":false,
               "payload":"${OUTPUTS/1/STATE}",
               "events":[
                   {
                       "type":"timer",
                       "period":"1000"
                   }
               ]
           }
       ]
   }
}

Client Configuration (broker section)

Put here MQTT client connection setup

This configuration example set NETIO device to connect to broker.hivemq.com with mqtt protocol, no ssl connection with credetials freedom/peace|love|empathy4ALL.

        "broker":{
            "url":"broker.hivemq.com",
            "protocol":"mqtt",
            "port":1883,
            "ssl":false,
            "type":"generic",
            "username":"freedom",
            "password":"peace|LOVE|empathy4ALL"
        },

Device Control (subscribe section)

Put here array of topics where to subscribe

Device output 1 is controlled with action received by subscription to netio/${DEVICE_NAME}/output/1/action topic with QOS 0

        "subscribe":[{
               "topic":"netio/${DEVICE_NAME}/output/1/action",
               "qos":0,
               "target":"OUTPUTS/1/ACTION",
               "action":"${payload}"
           }
       ],

Output State monitoring (publish section)

Put here array of topics where to publish.

Device send every 1000 s message to topic with QOS 0, retain true information with output 1 state

       "publish":[{
               "topic":"netio/${DEVICE_NAME}/output/1/state",
               "qos":0,
               "retain":true,
               "payload":"${OUTPUTS/1/STATE}",
               "events":[
                   {
                       "type":"timer",
                       "period":"1000"
                   }
               ]
           }
       ]

Config sections

Broker

here you have to define URL or IP address of machine hosting MQTT broker, level of security used for protocol, auth data and optionally some specific MQTT attributes, which are in the spec, but not mandatory required

Attributes table overview

Item	Presence	Possible Values	Description	JSON Config Usage
url	mandatory		MQTT broker URL	"url":"broker.hivemq.com"
port	mandatory	1 - 65535	MQTT broker port	"port":1883
ssl	mandatory	true, false	Use SSL crypted communication selector	"ssl":false
type	mandatory	generic	Communication/setup type option	"type":"generic"
username	mandatory	regexp+len	Credentials for MQTT broker	"username":"freedom"
password	mandatory	regexp+len	Credentials for MQTT broker	"password":"peace\|LOVE\|empathy4ALL"
clientid	optional	regexp+len	MQTT clientid. Max. 32 characters. Variables ${DEVICE_MAC} or ${DEVICE_NAME} can be used	"clientid":"myEcoTable01"
keepalive	optional	1 - 65535	MQTT keep alive period in seconds	"keepalive":90

Examples

Standard setup

SSL secured setup

Variables used setup

Subscribe

Hints to usage

When receive message in topic do action on target.

actiondef: When message in topic match actiondef payload do action on target.

Attributes table overview

Item	Presence	Possible Values	Description	JSON Config Usage
topic	mandatory	see table below	specification of the topic, which MQTT-flex device listens from broker and act accordingly	"topic":"netio/${DEVICE_NAME}/output/1/action"
qos	mandatory	0, 1 or 2	MQTT's Quality of Sevice - definition {here\|http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/errata01/os/mqtt-v3.1.1-errata01-os-complete.html#_Toc442180912}	"qos":0
target	mandatory		internal definition of action, which can be performed above the specified output	"target":"OUTPUTS/1/ACTION"
action	mandatory		a payload or a value the action attribute needs to have passed to	"action":"${payload}"
actiondef^{Not supported yet}	optional
json^{Not supported yet}	optional

Examples

Toggle output with standard payload

Toggle output with custom payload

Subscribe to more than one topic

Subscribe topic payload values specification for control of the output:

netio/<DEVICE_NAME>/output/1/action with payload for output control : (0 – off, 1 – on, 2 – short off, 3 – short on, 4 – toggle, 5 – no change)

Publish

when you need to send some data from device towards the broker, you have to specify it in the publish section - you can send measurement data as they are implemented, or you can use translation tables to send some pre-defined strings or even send JSON object. these attributes can be send periodicaly every time the timer reached specified value in seconds or based on value change (something like delta principle, but using only value differrence within defined period)

Hints to usage

When event send message with payload to topic.

Attributes table overview

Item	Presence	Possible Values	Description	JSON Config Usage
topic	mandatory	see table below	definition of the topic, how it is registered towards MQTT broker	"topic":"netio/${DEVICE_NAME}/output/1/load"
qos	mandatory	see table below	MQTT's Quality of Sevice - definition {here\|http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/errata01/os/mqtt-v3.1.1-errata01-os-complete.html#_Toc442180912}
retain	mandatory	boolean: true or false	MQTT's attribute to specify to broker how to store last received information - section 3.3.1.3 of {MQTT doc\|http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/errata01/os/mqtt-v3.1.1-errata01-os-complete.html#_Toc442180841}	"retain":true
payload	mandatory	see table below	definition of the topic, how it is registered towards MQTT broker	"topic":"netio/${DEVICE_NAME}/output/1/load"
events	mandatory	see table below	definition of events used for triggering sending of data via mqtt (change, delta, timer)
type
source
delta
period
payloaddef^{Not supported yet}

Examples

Publish energy periodically (event timer)

Publish current on change (delta)

Publish output state

Publish to more than one topic with different events

Target / Source

In MQTT-flex we use targets and sources specify where to apply some change or get value. Practically it means addressing of INPUTS/OUTPUTS and adding command or variable.

source - specifies from where the value will be read (specifies the source of data for payload, change detection, delta calculation)
target - specifies where the data should be sent or command applied (e.g. specifies the target for ACTION)

INPUT / OUTPUT (Target) selection

NETIO Devices can have inputs and outputs which can be different type. When you want to work with some variable you have to specify on which I/O. For doing that in MQTT-flex is implemented structured addressing with "/" separator. See the steps below how to compose source or target.

At first specify if requested variable is from/for INPUT or OUTPUT using keywords "OUTPUTS" or "INPUTS" .
Add "/" separator
Specify the number of INPUT/OUTPUT to 1(or TOTAL for summary statistics if available)
Add "/" separator
Specify requested variable or command

Note: Not all of OUTPUTS/INPUTS support all variables. Available variables are closely connected with the device functions and I/O features.

Note2: INPUTS available only on NETIO PowerDIN 4PZ

Examples:

adressing controll of output 3

OUTPUTS/3/ACTION

getting voltage on output 1

OUTPUTS/1/VOLTAGE

getting state of input 1

INPUTS/1/STATE

Commands

Variables

In some parameters is nescessary to use variables to get current state and measurements. Variables are separated in two categories:

Target/Source variables
Payload Topic variables

Target Source Variables

The list of available variables for each

OUTPUTS variables

VOLTAGE

Unit: V

Type: integer

Allowed in: "payload" "source"

Example 1: "payload":"Present RMS voltage on output 1 is ${OUTPUTS/1/VOLTAGE}"

Example 2: "source":"${OUTPUTS/1/VOLTAGE}"

CURRENT

Unit: mA

Type: integer

Allowed in: "payload" "source"

Example 1: "payload":"Present RMS current on output 1 is ${OUTPUTS/1/CURRENT}"

Example 2: "source":"${OUTPUTS/1/CURRENT}"

POWER_FACTOR

Unit: [-]

Type: float (2 decimals)

Allowed in: "payload" "source"

Example 1: "payload":"True Power Factor on output 1 is ${OUTPUTS/1/POWER_FACTOR}"

Example 2: "source":"${OUTPUTS/1/POWER_FACTOR}"

LOAD

Unit: W

Type: integer

Allowed in: "payload" "source"

Example 1: "payload":"Present load on output 1 is ${OUTPUTS/1/ENERGY}Wh"

Example 2: "payload":"Device's power connected to output 1 is ${OUTPUTS/1/ENERGY}Wh"

Example 3: "source":"${OUTPUTS/1/ENERGY}"

STATE

Type: bool(integer) - 0 or 1

Allowed in: "payload" "source"

Example 1: "payload":"Present output 1 state is ${OUTPUTS/1/STATE}"

Example 2: "source":"${OUTPUTS/1/STATE}"

ACTION

Type: integer

Possible actions:

0 - set state OFF
1 - set state ON
2 - short OFF (restart)
3 - short ON
4 - toggle (switch)
5 - no change

Allowed in: "target"

Example: "target":"OUTPUTS/1/ACTION"

DELAY [ms]

NAME

FREQUENCY

Unit: Hz

Type: integer

Allowed in: "payload" "source"

Example: "payload":"Frequency in power grid is ${OUTPUTS/1/ENERGY}Hz"

ENERGY

Unit: Wh

Type: integer

Allowed in: "payload" "source"

Example 1: "payload":"Consumed energy on output 1 is ${OUTPUTS/1/ENERGY}Wh"

Example 2: "source":"${OUTPUTS/1/ENERGY}"

ENERGY_START

Unit: unix timestamp

Type: integer

Allowed in: "payload"

Example 1: "payload":"Energy measured since ${OUTPUTS/1/ENERGY_START} unix time"

Example 2: "payload":"${OUTPUTS/1/ENERGY_START}" is output payload 1567654639

ENERGY_START_FMT

Unit: fmt date format

Type: string

Allowed in: "payload"

Example 1: "payload":"Energy measured since ${OUTPUTS/1/ENERGY_START}"

Example 2: "payload":"${OUTPUTS/1/ENERGY_START_FMT}" is output payload 2019-09-05T03:37:19+00:00

TOTALs - for use with devices having more than 1 measured output

OUTPUTS/TOTAL/ENERGY
OUTPUTS/TOTAL/LOAD
OUTPUTS/TOTAL/CURRENT
OUTPUTS/TOTAL/VOLTAGE
OUTPUTS/TOTAL/POWER_FACTOR
OUTPUTS/TOTAL/FREQUENCY

REST_JSON

Allow use of NETIO JSON structure to control outputs.

Type: string / JSON

Allowed in: "target" for Subscribe section

Example: "target": "REST_JSON"

The payload is JSON structure identical to NETIO JSON API M2M Protocol (documentation available at https://www.netio-products.com/files/NETIO-M2M-API-Protocol-JSON.pdf). You can control one or multiple outputs).

Payload example 1 - Toggle output 1: {"Outputs":[{"ID": 1,"Action": 4}]}

Payload example 1 - Turn output 1 OFF and output 3 ON: {"Outputs":[{"ID":1,"Action":0},{"ID":3,"Action":1}]}

INPUT variables

STATE

Type: bool(integer) - 0 or 1

Allowed in: "payload" "source"

Example 1: "payload":"Present input 1 state is ${INPUTS/1/STATE}"

Example 2: "source":"${INPUTS/1/STATE}"

S0

S0 Counter value Unit: -

Type: integer

Allowed in: "payload" "source"

Example 1: "payload":"Input 1 S0 Counter value is ${INPUTS/1/S0}impulses"

Example 2: "source":"${INPUTS/1/S0}"

Payload/topic variables

DEVICE_NAME

Can be used in: "payload", "topic"

Example 1: "payload":"${DEVICE_NAME}"

Example 2: "topic":"netio/${DEVICE_NAME}/output/1/action"

DEVICE_MAC

UPTIME ^{Not yet implemented}

PAYLOAD

Can be used in: "action"

Example: "action":"${PAYLOAD}"

OUTPUT_ID ^{Not yet implemented}

WIFI_SIGNAL^{Not yet implemented}

OUTPUTS_STATUS

Provide complete outputs status and measurement if supported.

Type: string / JSON

Allowed in: "payload" for Publish section

Example: "payload":"${OUTPUTS_STATUS}"

Payload example: { "GlobalMeasure":{"Voltage":236,"TotalCurrent":72,"TotalLoad":11,"TotalEnergy":167,"OverallPowerFactor":0.64,"Frequency":50.07,"Phase":-36.86,"EnergyStart":"2020-06-30T17:04:48+01:00"}, "Outputs":[ {"ID":1,"Name":"Power output 1","State":1,"Action":6,"Delay":2020,"Current":72,"PowerFactor":0.64,"Phase":-36.86,"Energy":139,"ReverseEnergy":0,"Load":11}, {"ID":2,"Name":"Power output 2","State":1,"Action":6,"Delay":2020,"Current":0,"PowerFactor":1.00,"Phase":0.00,"Energy":27,"ReverseEnergy":0,"Load":0}, {"ID":3,"Name":"Free Contact 3","State":1,"Action":6,"Delay":2020}, {"ID":4,"Name":"Free Contact 4","State":1,"Action":6,"Delay":2020} ]}

Extended MQTT flex JSON config examples

Default NETIO MQTT-flex configuration

This example demonstrates setup for connection to public broker.hivemq.com, measurement reporting and output control.

The device cabe be controlled via netio/${DEVICE_NAME}/output/1/action topic by sending standard NETIO action values:

0 - OFF
1 - ON
2 - SHORT OFF
3 - SHORT ON
4 - TOGGLE
5 - NO ACTION.

The device report measurements:

Output state - every 15 minutes or by change
Voltage [V]- every 5 minutes or by change of 1 V
Current [mA]- every 5 minutes or by change of 50 mA
Load(Power) [W]- every 5 minutes or by change of 10 W
Energy(Consumption) [Wh]- every 15 minutes or by change of 1Wh
True Power Factor (TPF) [-]- every 5 minutes or by change of 0.02
Frequency [Hz]- every 1 hour or by change of 0.1 Hz

For register all values, you can use wildcard netio/${DEVICE_NAME}/output/1/#

{
  "config":{
     "broker":{
        "url":"broker.hivemq.com",
        "protocol":"mqtt",
        "port":1883,
        "ssl":false,
        "type":"generic",
        "username":"",
        "password":"",
        "clientid":"moje${DEVICE_NAME}${DEVICE_MAC}",
        "keepalive":30
     },
     "subscribe":[
        {
           "topic":"netio/${DEVICE_NAME}/output/1/action",
           "qos":0,
           "target":"OUTPUTS/1/ACTION",
           "action":"${payload}"
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/switch",
           "qos":0,
           "target":"OUTPUTS/1/ACTION",
           "action":4
        }
     ],
     "publish":[
        {
           "topic":"netio/${DEVICE_MAC}/output/1/state",
           "qos":0,
           "retain":true,
           "payload":"${OUTPUTS/1/STATE}",
           "events":[
              {
                 "type":"change",
                 "source":"OUTPUTS/1/STATE"
              },
              {
                 "type":"timer",
                 "period":900
              }
           ]
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/voltage",
           "qos":0,
           "retain":false,
           "payload":"${OUTPUTS/1/VOLTAGE}",
           "events":[
              {
                 "type":"timer",
                 "period":300
              },
              {
                 "type":"delta",
                 "source":"OUTPUTS/1/VOLTAGE",
                 "delta":1
              }
           ]
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/current",
           "qos":0,
           "retain":false,
           "payload":"${OUTPUTS/1/CURRENT}",
           "events":[
              {
                 "type":"timer",
                 "period":300
              },
              {
                 "type":"delta",
                 "source":"OUTPUTS/1/CURRENT",
                 "delta":50
              }
           ]
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/load",
           "qos":0,
           "retain":false,
           "payload":"${OUTPUTS/1/LOAD}",
           "events":[
              {
                 "type":"timer",
                 "period":300
              },
              {
                 "type":"delta",
                 "source":"OUTPUTS/1/LOAD",
                 "delta":10
              }
           ]
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/energy",
           "qos":0,
           "retain":false,
           "payload":"${OUTPUTS/1/ENERGY}",
           "events":[
              {
                 "type":"timer",
                 "period":900
              },
              {
                 "type":"delta",
                 "source":"OUTPUTS/1/ENERGY",
                 "delta":1
              }
           ]
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/tpf",
           "qos":0,
           "retain":false,
           "payload":"${OUTPUTS/1/POWER_FACTOR}",
           "events":[
              {
                 "type":"timer",
                 "period":900
              },
              {
                 "type":"delta",
                 "source":"OUTPUTS/1/POWER_FACTOR",
                 "delta":0.02
              }
           ]
        },
        {
           "topic":"netio/${DEVICE_NAME}/output/1/frequency",
           "qos":0,
           "retain":false,
           "payload":"${OUTPUTS/1/FREQUENCY}",
           "events":[
              {
                 "type":"timer",
                 "period":3600
              },
              {
                 "type":"delta",
                 "source":"OUTPUTS/1/FREQUENCY",
                 "delta":0.1
              }
           ]
        }
     ]
  }
}

@@ Line 492: / Line 492: @@
 Payload example 1 - Toggle output 1: <code>{"Outputs":[{"ID": 1,"Action": 4}]}</code>
-Payload example 1 - Turn output 1 OFF and output 3 ON: <code>{"Outputs":[{"ID":1,"Action":0},{"ID":3,"Action":6}]}</code>
+Payload example 1 - Turn output 1 OFF and output 3 ON: <code>{"Outputs":[{"ID":1,"Action":0},{"ID":3,"Action":1}]}</code>
 === INPUT variables ===

Difference between revisions of "MQTT-flex"

Revision as of 18:35, 27 October 2020

Contents

Supported devices:

Simple MQTT-flex configuration + explanation

Client Configuration (broker section)

Device Control (subscribe section)

Output State monitoring (publish section)

Config sections

Broker

Attributes table overview

Examples

Standard setup

SSL secured setup

Variables used setup

Subscribe

Hints to usage

Attributes table overview

Examples

Toggle output with standard payload

Toggle output with custom payload

Subscribe to more than one topic

Publish

Hints to usage

Attributes table overview

Examples

Publish energy periodically (event timer)

Publish current on change (delta)

Publish output state

Publish to more than one topic with different events

Target / Source

INPUT / OUTPUT (Target) selection

Examples:

Commands

Variables

Target Source Variables

OUTPUTS variables

VOLTAGE

CURRENT

POWER_FACTOR

LOAD

STATE

ACTION

DELAY [ms]

NAME

FREQUENCY

ENERGY

ENERGY_START

ENERGY_START_FMT

TOTALs - for use with devices having more than 1 measured output

REST_JSON

INPUT variables

STATE

S0

Payload/topic variables

DEVICE_NAME

DEVICE_MAC

UPTIME Not yet implemented

PAYLOAD

OUTPUT_ID Not yet implemented

WIFI_SIGNALNot yet implemented

OUTPUTS_STATUS

Extended MQTT flex JSON config examples

Default NETIO MQTT-flex configuration

Navigation menu

Search

UPTIME ^{Not yet implemented}

OUTPUT_ID ^{Not yet implemented}

WIFI_SIGNAL^{Not yet implemented}